National Instruments NI LabVIEW User Manual download pdf (Page 6)

Embedded Module for Blackfin Processors 6 ni.com

On the board, the power LED illuminates, and you might see other

visible activity, such as blinking LEDs. The connection activates the

Windows Found New Hardware Wizard.

2. Follow the instructions on the screen to install the software

automatically. A Windows message notifies you when the new device

is ready for use and the hardware installation is complete.

3. Verify that the USB monitor LED is lit. The LED is in close proximity

to the USB connector. The lit LED signifies that the board is

communicating properly with the host computer and is ready to run.

Refer to the ADSP-BF537 EZ-KIT Lite Evaluation System Manual in

the EZ-KIT box for more detailed information about the USB monitor

LED.

4. For a USB-based ICE, attach the JTAG cable to the emulation target.

Refer to the emulator documentation for more information about

USB-based ICE.

Upgrading to the Embedded Module for Blackfin

Processors 2.0

This section describes upgrade and compatibility issues for the Embedded

Module for Blackfin Processors 2.0.

Embedded Project Manager

The Embedded Module for Blackfin Processors no longer supports the

Embedded Project Manager. Use the Project Explorer window instead.

Refer to the Creating the LabVIEW Project section for information about

using the Project Explorer window. Refer to the Upgrading Blackfin VIs

and Embedded Projects section for information about converting

embedded project (

.lep) files.

Upgrading Blackfin VIs and Embedded Projects

If you created Blackfin VIs using the Embedded Module for Blackfin

Processors 1.0, you must create projects and update the VIs for use with

LabVIEW 8.2.1 and the Embedded Module for Blackfin Processors 2.0.

Caution National Instruments recommends you back up your files before you

begin updating your Blackfin VIs for use with the Embedded Module for Blackfin

Processors 2.0. The Embedded Module for Blackfin Processors 1.0 cannot open VIs

you save in version 2.0.

The Embedded Module for Blackfin Processors includes a utility to

help you convert LabVIEW 7.1 embedded project (

.lep) files to

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

No comments

National Instruments NI LabVIEW User Manual Page 6