National Instruments cFP-RTD-124 User Manual download pdf (Page 2)

FP-RTD-124 and cFP-RTD-124 2 ni.com

Installing the FP-RTD-124

The FP-RTD-124 mounts on a FieldPoint terminal base (FP-TB-x).

Hot plug-and-play enables you to install the FP-RTD-124 onto a

powered terminal base without disturbing the operation of other

modules or terminal bases. The FP-RTD-124 receives operating

power from the terminal base.

To install the FP-RTD-124, refer to Figure 1 and complete the

following steps:

1. Slide the terminal base key to either position X, used for any

module, or position 1, used for the FP-RTD-124 module.

2. Align the FP-RTD-124 alignment slots with the guide rails on

the terminal base.

3. Press firmly to seat the FP-RTD-124 on the terminal base.

When the module is firmly seated, the terminal base latch locks

it into place.

Figure 1. Installing the FP-RTD-124

Installing the cFP-RTD-124

The cFP-RTD-124 mounts on a Compact FieldPoint backplane

(cFP-BP-x). Hot plug-and-play enables you to install the

cFP-RTD-124 onto a powered backplane without disturbing the

operation of other modules or connector blocks. The cFP-RTD-124

receives operating power from the backplane.

Alignment

Slot

Key

Latch

Guide Rails

Terminal BaseI/O Module

1 2 3 4 5 6 7 ... 14 15

No comments

National Instruments cFP-RTD-124 User Manual Page 2