National Instruments FP-AI-112 User Manual download pdf (Page 12)

FP-AI-112 and cFP-AI-112 12 ni.com

Physical Characteristics

Indicators .......................................... Green POWER and

READY indicators

Weight

FP-AI-112................................... 142 g (5.0 oz)

cFP-AI-112.................................113 g (4.0 oz)

Power Requirements

Power from network module ............ 350 mW

Isolation Voltage

Channel-to-ground isolation

Continuous ................................. 250 V

rms

Installation Category II

Dielectric withstand.................... 2,300 V

rms

, 1 minute

Channel-to-channel isolation ............ None

Environmental

FieldPoint modules are intended for indoor use only. For outdoor

use, they must be mounted inside a sealed enclosure.

Operating temperature ...................... –40 to 70 °C

Storage temperature .......................... –50 to 85 °C

Humidity ........................................... 10 to 90% RH,

noncondensing

Maximum altitude............................. 2,000 m; at higher altitudes

the isolation voltage ratings

must be lowered.

Pollution Degree ............................... 2

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

National Instruments FP-AI-112 User Manual Page 12