National Instruments cFP-RTD-124 User Manual download pdf (Page 3)

To install the cFP-RTD-124, refer to Figure 2 and complete the

following steps:

1. Align the captive screws on the cFP-RTD-124 with the holes

on the backplane. The alignment keys on the cFP-RTD-124

prevent backward insertion.

2. Press firmly to seat the cFP-RTD-124 on the backplane.

3. Using a number 2 Phillips screwdriver with a shank of at least

64 mm (2.5 in.) length, tighten the captive screws to 1.1 N ⋅ m

(10 lb ⋅ in.) of torque. The nylon coating on the screws

prevents them from loosening.

Figure 2. Installing the cFP-RTD-124

1 cFP Backplane

2 cFP Controller Module

3 cFP I/O Module

4Captive Screws

5 Screw Holes

2 1

1 2 3 4 5 6 7 8 ... 14 15

No comments

National Instruments cFP-RTD-124 User Manual Page 3