National Instruments Smart Camera User Manual download pdf (Page 7)

Replacing Fuses

To replace a blown fuse on the accessory, complete the following steps.

1. Unplug the accessory power.

2. Remove all signal wires and cables from the accessory.

3. Unscrew the two screws from a side panel with a Phillips head screwdriver and remove the side

panel as shown in Figure 4.

Figure 4. Removing the Circuit Board

4. Slide the circuit board out.

5. Replace the blown fuse while referring to Figure 1 for the fuse location.

Spare fuses can be found next to each fuse location as shown in Figure 1. You also can order

additional fuses from Littelfuse at

www.littelfuse.com or from electronics distributors.

Fuse Littelfuse Part Number Description

Power 0448002 2A, 125V lead-free very fast-acting NANO

subminiature

ceramic surface mount fuse, 6.10 × 2.69 mm

Iso Out 0,

Iso Out 1,

RS-232

0448.200 200mA, 125V lead-free very fast-acting NANO

subminiature ceramic surface mount fuse, 6.10 × 2.69 mm

NATIONAL

NI SMART CAMERA

I/O ACCESSORY

INSTRUMEN

1 2 3 4 5 6 7 8 9 10 11

No comments

National Instruments Smart Camera User Manual Page 7