National Instruments Smart Camera User Manual download pdf (Page 8)

NI Smart Camera I/O Accessory User Guide 8 ni.com

Specifications

This section lists the specifications of the NI Smart Camera I/O Accessory. These specifications are

typical at 25 °C, unless otherwise noted.

Note Refer to the NI 17xx Smart Camera User Manual for specifications about signals.

Power Requirement

Supply voltage .......................................................24 VDC +20%/–15% (IEC 1311)

Current requirement ...............................................Refer to the specification for your NI Smart Camera

Physical

Dimensions ............................................................8.712 cm × 8.509 cm × 4.445 cm

(3.43 in. × 3.35 in. × 1.75 in.)

Weight ....................................................................98.1 g (3.46 oz)

Spring terminal blocks ...........................................6, 2 positions per block

Wire gauge .....................................................12–28 AWG wire

Camera connector ..................................................15-pin D-SUB male connector

RS-232 connector ..................................................9-pin D-SUB male connector

24VDC connector ..................................................15-pin D-SUB female connector

Environmental

The NI Smart Camera I/O Accessory is intended for indoor use only.

Operating temperature ...........................................0 to 55 °C

Storage temperature ...............................................–20 to 70 °C

Humidity ................................................................10 to 90%, noncondensing

Pollution Degree ....................................................2

Approved at altitudes up to 2,000 m.

Safety

The NI Smart Camera I/O Accessory is designed to meet the requirements of the following standards of

safety for electrical equipment for measurement, control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

Note For UL and other safety considerations, refer to the product label, or visit ni.com/

certification

, search by model number or product line, and click the appropriate link in the

Certification column.

1 2 3 4 5 6 7 8 9 10 11

No comments

National Instruments Smart Camera User Manual Page 8